供应Nodson-ACE选择性波峰焊 KISS-101A

价格 未设定价格,您可以向供应商询价以得到产品报价
手机专享
手机下单更便宜
物流

江苏 苏州

    加工定制 品牌 ACE 型号 KISS-101A
    用途 通孔元器件焊接 别名 选择性波峰焊



    Model KISS-101A
    “Keep It Simple Soldering”
    “Low Cost
    Selective Machine”

    ADVANTAGES:
    Simple and Affordable…..
    The KISS-101A is used to solder through hole components
    on SMT boards within close proximity of adjacent components.
    This process overcomes the limitations of operator
    dependent soldering with a truly flexible automated molten
    solder delivery system.
    The KISS-101A couples high throughput with precise process
    controls. The programmable features provide the tools
    to set all process parameters, including immersion depths,
    pre-heat dwells, travel distances and speeds, solder temperature
    and wave height. Once set, the system will repeat
    precisely.
    The KISS-101A will out produce 3 or more operators soldering
    with an iron while significantly increasing the solder joint
    quality and to a predictable schedule.
    “You can expect a ROI of 2-3 months or less”

     

    The KISS-101A is by far the lowest cost automated selective
    soldering machine available using the proven ‘traveling mini–
    solder wave” soldering process. The KISS-101A includes the
    following standard features:
    FEATURES:
    • Universal PCB location rails.
    • Lead alloy solder pot and pump assembly (lead free available).
    • 6mm and 12mm “Bullet” nozzles.
    • Programming camera
    • Manual fiducial location
    • Heated Nitrogen to the solder nozzle.
    • Windows O/S.
    • Rapid setup and time to “first production” using the machine
    “teach” functions or available “off line” programming.
    • Programmable solder wave flow rate.
    • Set the time/temp profile for each individual component type
    for maximized process control and TAKT time.
    • Absolute control over all critical process parameters:
    - Solder temperature interlocked to within 2 degrees C.
    - Height, and travel speed of the solder wave.
    - Programmable initial pre-heat soak time
    • Will Process PCBs 12” x 12”
    • Step and repeat capability in both X and Y axis for multiple
    boards in a panel.
    • Set-up kit containing all necessary support tools.
    • One year guarantee covering the entire machine and two
    years for the solder pot and pump assembly.

     

    SPECIFICATIONS:
    PCB Panel Size
    Minimum Maximum
    2” x 2” 12” x 12”
    (can handle PCBs up to 14” x 24” with manual slide over)
    Safe “Keep Away” (distance to adjacent pads) 2mm
    Motion
    • Z-Axis Accuracy/Repeatability +/-.002"
    Speed 0-2 inches/sec.
    • X and Y Axis Accuracy/Repeatability +/-.002"
    Speed 0-4 inches/sec.
    Solder Pot
    • Temperature PID proportioning (0-400°C) ± 2°C
    • Solder Capacity 30 lbs.
    • Pump PC controlled
    Controls PC with Windows XP O.S.
    Physical
    • Dimensions 40" wide x 38" deep x 32" high
    • Weight 275 lbs.
    • Dimensions (with bench) 60" wide x 40" deep x 58" high
    • Load height on bench 44" high
    Facilities
    • Power 120VAC/1 Ph/60 Hz 15 amps
    • Air 80 - 90 PSI
    • Nitrogen 15-50 CFH @ 60-70 PSI
    • Exhaust Hood with 350 CFM recommended

    导购推荐

    订购说明

    买家还在看

    苏州工业园区携程电子科技有限公司
    邱志良
    所在地区 :
    苏州市苏州苏蠡路41号财智商务广场C1311
    产品名
    价格

    输入你的公司名称

    联系人:何经理

    手   机:400-xxx-1234

    电   话:400-xxx-1234

    传   真:400-xxx-1234

    地   址:浙江省杭州市

    网   址: